Currency: USD
客户关怀:  + 86- 0513-84103536            电子邮件: [email protected]
Home>CO2 Laser Power Supply>80-100W Power Supply>CO2 Laser Power 100-120W Supply Monitor AC90-250V for CO2 Laser Engraving Cutting Machine RHZ-100
CO2 Laser Power 100-120W Supply Monitor AC90-250V for CO2 Laser Engraving Cutting Machine RHZ-100

CO2 Laser Power 100-120W Supply Monitor AC90-250V for CO2 Laser Engraving Cutting Machine RHZ-100 Item NO.: 4001278084395

Write a Review
US$ 194.00
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name CO2 Laser Power 100-120W Supply Monitor AC90-250V for CO2 Laser Engraving Cutting Machine RHZ-100
Item NO. 4001278084395
Weight 2.6 kg = 5.7320 lb = 91.7123 oz
Volume 0.089 CBM
Category CO2 Laser Power Supply > 80-100W Power Supply
Brand Hardray
Creation Time 2020-09-01

> High intelligence

Built-in control, can communicate with motion controller, and it can communicate with max 32pcs power supplies by cascade connecting, thenthe controller panel can display working condition of power supply, very easy for user to monitor and judge the fault.

> Make the maintenance much easier

User can judge the problem by himself. Multi-function LCD screen: One LCD screen can show the information of two power supplies, easy use for multi-head machine.

> Universal

With PFC function, AC90-250V input voltage range, globally universal.

> Open circuit protection

When the high voltage end is in open circuit or not connected well, the power supply will start automatic protection, to prevent high voltage arc effectively.

> More safety

With high voltage discharge function, no residual voltage when turning off, safer for user.

> Excellent cover with patent design

Good appearance, better heat dissipation. Improved current control mode, more stable laser, better compatibility.

· P5_A connect with the second PSU · P5_B connect with Ruida controller or LCD · P4 and P2 are the terminals same as normal Power Supply

If there is only one PSU need to connect with one control board( like RT6224G), Please connect P5 with RT6224G.S RT-link, Just like the methed shows in picture behind, P5_A can be empty if there is only one PSU.

· If only one power supply is connected to the board, only the power supply 1 and the control board need to be connected. · Connection mode of multiple power supplies: ports 6, 7 and 8 of power supply 2 are connected to ports 2, 3 and 4 of power supply 1. · Ports 6, 7 and 8 of power supply 1 are respectively connected to ports 3, 1 and 2 of board card 0rtlink. · Ports 6, 7 and 8 of the third power supply are connected to ports 2, 3 and 4 of power supply 2. In this order, 32 power supplies can work at the same time.

· If only one power supply is connected to the board card, only the power supply 1 and the display screen need to be connected. · Connection mode of multiple power supplies: ports 6, 7 and 8 of power supply 2 are connected to ports 2, 3 and 4 of power supply 1. · Ports 6, 7 and 8 of power supply 2 are respectively connected to ports 3, 1 and 2 of board card 0rtlink. · When the 4P dial switch of the independent display screen is turned to the on position at the same time, the screen will be displayed in Chinese, otherwise it will be displayed in English (subsequent support for multi-national languages). · It is recommended to use 4-core connecting wire between power supply and board or display, and the wire diameter is more than 0.5mm.

> NOTES

· P3 is a test button. If output current approach or above 50% of the rated current when the button is pressed. · It indicates that the PSU is OK. · P2 is the terminal of AC input. 110V-ac or 220V-ac P1 Do not operate this terminal.

Area A : lf falut occurs, this area will display the fault information. Area B : the button of the panel will display the conditions of the power supply, such as voltage current, etc.

No related record found